74HC390 IC - (SMD Package) - Dual 4-bit Decade Ripple Counter IC (74390 IC)

The 74HC390 is a dual 4-bit decade ripple counter divided into four separately clocked sections. The counters have two divide-by-2 sections and two divide-by-5 sections. These sections share an asynchronous master reset input (nMR) and can be used in a BCD decade or bi-quinary configuration. If master reset inputs 1MR and 2MR are used to clear all 8 bits of the counter simultaneously, numerous counting configurations are possible within one package. Section clocks nCP0 and nCP1, allow ripple counter or frequency division applications of divide-by-2, 4, 5, 10, 20, 25, 50 or 100. The HIGH-to-LOW transition of the clock inputs nCP0 and nCP1 trigger each section. For BCD decade operation, the nQ0 output is connected to the nCP1 input of the divide-by-5 section. For bi-quinary decade operation, the nQ3 output is connected to the nCP0 input and nQ0 becomes the decade output. A HIGH on the nMR input overrides the clocks and sets the four outputs LOW. Inputs include clamp diodes. It enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Features:-

• Input levels: CMOS level

• Two BCD decade or bi-quinary counters

• One device can be configured to divide-by-2, 4, 5, 10, 20, 25, 50 or 100

• Two master reset inputs to clear each decade counter individually

• Specified in compliance with JEDEC standard no. 7A

• ESD protection:

- HBM JESD22-A114F exceeds 2000 V

- MM JESD22-A115-A exceeds 200 V

• Multiple package options

Specification:-

Parameter	Specification
Supply Voltage (VCC)	− 0.5 to + 7.0V DC
Clamp Diode Current (IIK, IOK)	± 20 mA
DC VCC or GND Current, per pin (ICC)	± 50 mA
Storage Temperature Range (TSTG)	− 65°C to + 150°C
Power Dissipation (PD) (Note 4)	500 mW
Lead Temperature (TL) (Soldering 10 seconds)	260°C

Related Document:-

74HC390 SMD Data Sheet